Shipping Info:
Order today for estimated delivery within 7-14 days.
*Ships directly from Build Kit Boards
The Electric Skateboard Powertrain Combo:
Build your own Electric Skateboard with Ease! This Powertrain Combo provides all the complicated parts of build your own board, but without the headache!
This is essentially one of our DIY kits, excluding the deck, tools, wheels, and various other parts. This kit includes everything you need to power your own custom Electric Skateboard kit!
If you're looking for a more comprehensive kit, check out our full kits for everything you'd need, including tools and all hardware!
Includes:
- 1x ESC
- 1x Remote
- 2x Motor
- x Battery
- 1x Full set of Caliber II Style Trucks
- 2x Motor Mounting Plates
- 2x Motor Hardware
- 1x Truck Hardware
- 2x 15T 15mm Pulleys
- 2x Motor Cables
- 1x Power Cable
- 1x ESC RailCore Case (Preassembled, Ready to Mount)
- 1x ESC Rail PCB
- x Rail Module
- 2x Rail Mounting Hardware
- 1x Cotter Pin
- 1x Standard 3a Charger
LingYi ESC and Remote
- Built for 50.4 Volt Applications (Pairs perfectly with our RailCore batteries!)
- We utilize the LingYi ESC and remote to provide unparalleled performance and reliability. While VESC based ESCs are customizable, they are not as reliable as we need them to be. Everything is developed in-house at LingYi, so the remote connection will be rock solid and you will never have to worry about the ESC leaving you hanging. Plus it has all of the cool features such as roll to start, forward and reverse power, 4 riding modes, and much more!
6354 Dual Motors
- 160kv
- 3000W Maximum Power (per motor)
- 8mm Shaft with D-Bore - new pulley mounting system (no more set screws)
6384 Dual Motors
- 160kv
- 4000W Maximum Power (per motor)
- 8mm Shaft with D-Bore - new pulley mounting system (no more set screws)
- 66% More Torque!
About RailCore Battery & ESC Systems:
RailCore is our modular, quick-connect battery & ESC enclosure system. RailCore allows you to easy mount, or remove your modules with ease, along with being able to connect them in parallel! (3 packs maximum). The RailCore ESC and Batteries connect via XT90 connectors which slide together when mounting. Once you've installed your pin to lock in the modules, you're ready to ride! Then when its time to switch batteries you can do so in under 5 seconds. Or, you can leave them all on the board to charge at once.
RailCore has changed E-board batteries from being a permanent decision to the most modular part of your board! Swapping, adding, and removing batteries are easier than ever, enabling you to have the perfect board for each ride. Please mind that range is dependent on riding style, conditions, and intensity.
RailCore batteries are built to perform. While they are just as capable on their own, a single battery may experience battery sag. Refer to this chart to have accurate expectations:
Battery (Quantity)
|
Battery Sag
|
Power
|
Range
|
12s1p (1)
|
Prevelant
|
1700W
|
6 Mi
|
12s1p (2)
|
Noticable
|
3400W
|
12 Mi
|
12s1p (3)
|
Best
|
4000W
|
20 Mi
|
12s2p (1)
|
Prevelant
|
1000W
|
15 Mi
|
12s2p (2)
|
Minimal
|
2000W
|
35 Mi
|
12s2p (3)
|
Best
|
4000W
|
60 Mi
|
Battery Size:
We offer two different battery sizes, 12s1p and 12s2p. Both of these options have their own strengths, which we will highlight here to best gauge your options. All specifications below are for 1 battery. If you have 2 or 3 batteries in parallel you need to double or triple the values accordingly.
Battery |
12s1p
|
12s2p |
Range* |
~6 miles |
~20 miles |
Weight |
2 lbs |
4.75 lbs |
Dimensions |
160 x 160mm |
160 x 160mm |
Cell
|
18650 Molicel P28A |
21700 Samsung 50E |
Capacity |
2,800mAh |
5,000mAh |
Discharge Current |
15A |
19.6A |
BMS + Protections |
Built in |
Built in |
*Range estimations are with 97mm wheels, 170lb rider, moderate speed, and moderate hills. Actual range is hard to predict and highly dependent on on your weight, temperature, elevation gain, wheel type, and riding style.
This package includes:
1 - Electric Skateboard Powertrain Combo