Onewheel Error Codes
Disclaimer: The information provided herein is for informational purposes only and is based on the best of our knowledge at the time of publication. We make no guarantees about the accuracy, completeness, or suitability of the information provided. Any reliance you place on such information is strictly at your own risk. We shall not be liable for any loss or damage arising from the use of, or reliance on, the information provided.
Service / Repairs: If you are experiencing a Onewheel error code and require further assistance, please schedule an appointment with our Service Center HERE to have our team of specialized PEV technicians to perform a comprehensive diagnostic of your board.
Error 0
No errors detected
Error 1: "Need Some Juice"
Error 1: error_bms_low_battery.
Message: Your Onewheel needs to be recharged. Please plug in the charger.
Error 2: "Need Some Juice"
Error 2: error_voltage_low
Message: Your Onewheel needs to be recharged. Please plug in your charger.
Error 3: "Battery Overcharged"
Error 3: error_voltage_high
Message: Your battery is full. Please avoid downhills or strong braking while battery is fully charged.
Error 4: "Start In Ready Position"
Error 4: error_fall_detected
Message: Your Onewheel must be placed on the ground when you the power button. Please switch Onewheel off and back on.
Error 5: "Start In Ready Position"
Error 5: error_pickup_detected
Message: Onewheel must be placed on the ground before you press the power button. Please switch Onewheel off and back on.
Error 6: "Getting A Little Rowdy"
Error 6: error_over_current_detected
Message: An overcurrent has been detected (6). Please switch Onewheel off and back on.
Error 7: "Hot Or Cold"
Error 7: error_over_temperature
Message: Your battery temperature is out of its safety range (7).
Error 8: "Hot Or Cold"
Error 8: error_battery_temperature_old
Message: Your battery temperature is out if its safety range (8).
Error 9: "Something's Weird"
Error 9: error_bad_accelerometer
Message: An initialization test (accelerometer) did not succeed. Please switch Onewheel off and back on.
Error 10: "Something's Weird"
Error 10: error_bad_current_sensor
Message: An initialization test (sensor) did not succeed. Please switch Onewheel off and back on.
Error 11: "Something's Weird"
Error 11: error_bad_hall_sensor
Message: An initialization test (hall sensor) did not succeed.Please switch Onewheel off and back on.
Error 12: "Something's Weird"
Error 12: error_bad_motor
Message: An initialization test (motor) did not succeed. Please switch Onewheel off and back on.
Error 13: "Getting A Little Rowdy"
Error 13: error_over_current_13
Message: An overcurrent has been detected (13). Please switch Onewheel off and back on.
Error 14: "Getting A Little Rowdy"
Error 14: error_over_current_14
Message: An overcurrent has been detected (14). Please switch Onewheel off and back on.
Error 15: "I Need My Personal Space"
Error 15: error_rider_detect_zone
Message: Do not press the rider detect zone while switching on the Onewheel. Please switch Onewheel off and back on.
Error 16
Error 16: error_communications
Message: Your Onewheel needs rebooting, please power cycle. If proble persists, contact support.
Error 17: "Hot Or Cold"
Error 17: error_battery_temperature
Message: Your battery temperature is out of its safety range.
Error 18: "Hot Or Cold"
Error 18: error_motor_temperature
Message: Your motor temperature is out of its safety range.
Error 19: "Onewheel OverchargeD"
Error 19: error_controller_over_voltage
Message: Please avoid downhills or strong braking while battery is fully charged.
Error 20
Error 20: error_disabled
Message: Please contact Support.
Error 21
Error 21: error_charger_connected
Message: Charger connected, please unplug to ride.
Error 22
Error 22: error_bms_serial_mismatch
Message: Incompatible Hardware etected.
Error 23
Error 23: error_ah_compare
Message: Incompatible Hardware Detected.