*SHIPS DIRECTLY FROM LAND-SURF*

XCELL Turbine V2 6565 Brushless Motor

XCELL Turbine V2 6565 Brushless Motor

sku-43836227748056


  • In stock, ready to ship
  • Inventory on the way

Compatibility:




Regular price$399.99
/
Shipping calculated at checkout.
Desired KV:
Wire Sheath Color
 More payment options

Guaranteed safe and secure checkout!

Shipping Info:

Order today for estimated delivery within 7-14 days.

*Ships directly from Land-Surf

The XCELL Turbine V2 6565 Brushless Motor 

The XCELL Turbine™ motors are back, and the V2 have been redesigned from the ground up with industry leading features no other motor for e-skate can match! Clever design, combined with state-of-the-art simulation studies in Maxwell ANSYS software result in a motor unlike any other. No expense was spared in designing these motors, and the results speak for themselves!

These Turbine V2 motors are far and away the highest quality, best-built motors you can buy anywhere in the world for e-skate applications. It's the sort of quality motor usually reserved only for high-end RC car, heli, and plane applications. And it's available in 190KV and 130KV versions, to cover a range of voltages from 12s up through 20s Li-ion.

Turbines are so named because when they spool up, they sound like a turbine jet engine...an addicting sound that will give you goosebumps when you hear it pushing your board to new levels of power!

A quad-bearing supported shaft means more time between maintenance intervals, and a more true-running shaft. It's now much easier to inspect, clean, or replace the bearings in your motor (the one part that does "wear out" eventually). The installed high-quality Japanese bearings are ultra-smooth and reliable. When it's time to change them out, you can do so easily!

Why is this important? Because with most motors, the bearings are the only thing that "wears" over time – so for max longevity and smoothness, it's imperative that bearing changes don't destroy the motor or your sanity.

Newly developed for the V2s, the new Cryocore™ cooling feature draws air in from the holes at the base and up through the stator core, where large radial cooling fins transfer heat away from the motor and out the end of the rotor. This feature continually pumps a large volume of cool air directly through the parts of the motor that generate heat. Every other outrunner motor of this size has a solid core, and therefore, generated heat can only be removed from outside of the stator core, in a much less efficient transfer. 

What this means is that you can run Turbine V2s at far higher power, for longer, because heat is the #1 enemy of an electric motor. Keeping the core cool is paramount to delivering large amounts of torque without overheating.

XCELL™ TURBINE V2 6565 FEATURES

  • 8KW Continuous, 12KW peak for massive power

  • 65mm diameter x 65mm height stator

  • 22 poles for high torque

  • 7075 T6 Aluminum construction

  • Custom-designed 10mm high carbon, hardened stainless steel shaft. (8mm also available).

  • 180C rated N45-UH magnets and 180C copper stator wiring.

  • Magnets are held in place with high temp epoxy AND special machined rings for mechanical lock for ultimate reliability.

  • .2mm Japanese silicon steel stator laminations

  • 12 gauge, 14" high strand copper motor leads with 5.5mm bullets (female side of the bullets for you to solder to your VESC phase wires are included)

  • Up to 150 amps continuous power

  • Quad-bearing supported shaft, featuring high quality Japanese bearings for the ultimate smoothness. And easily changed out if you ever need to. Spare bearings are easy to find, and we also offer the correct size NSK replacements.

  • 190KV and 130KV available (12s-16s and 18s-20s battery configs)

  • Triple Hall sensors for quiet FOC operation - plug and play into Tronic, UBOX, Spintend, Unity®, and other VESC brands. NOTE: DO NOT use Stormcore 100 models for these motors. The Stormcore 100 series VESCs are not reliable and many are catching fire shortly after installation. AVOID THEM!

    The best VESCS are called Tronic 250Rs and perform incredibly with these motors.

  • Drop-in mounting replacements for Lacroix belt-driven boards like the Nazare and Lonestar (and SS models).

  • Choice of black, red, or blue wire sheathing

  • Two mounting hole diameter dimensions supported 

Dimensions:  77mm in diameter, and 75mm long (not counting the shaft).
Weight: 1040g.

M4, square mounting pattern in typical 63-series motor size.

All Turbine V2's are currently black.

Turbine™ V2 Series 6565 Motors are sold individually.

This package includes:

1 - XCELL Turbine V2 6565 Brushless Motor 




Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)