How to Dye TFL Life Savers

Adding a personal touch to your Onewheel doesn't stop at custom grip tape or fenders. One creative way to make your ride stand out is by dyeing Onewheel Life Savers. Whether you're aiming for a subtle accent or a bold statement, this DIY project allows you to tailor your Onewheel's look to match your style. Here’s a step-by-step guide to get you started:

Supplies You'll Need:

• Large Container for Dyeing: Ensure it's big enough to comfortably hold the Life Savers you want to dye.
• Very Hot Water: Hot water helps activate the dye and ensure even coloring.
• Rit Dyemore Synthetic Dye: Choose your preferred colors. Rit Dyemore works well for synthetic materials like Life Savers. Order Here 
• Hot Glue Gun: Use this to create patterns or mask off areas you don’t want dyed.
• White or Clear Life Savers: These will be your canvas for customization. (Onewheel GT-S/GT HERE / Onewheel+XR and Pint HERE

Step-by-Step Instructions:

1. Prepare Your Workspace:

• Set up your large container in a well-ventilated area that can tolerate spills. Protect surfaces from potential dye stains.

2. Heat Water:

• Boil enough water to fill your large container. You’ll need approximately 1 gallon per bottle of Rit Dyemore.

3. Mix Dye and Water:

• Once the water reaches boiling point, pour it into your large container. Add the Rit Dyemore dye according to the instructions on the bottle. Stir well to ensure the dye is evenly distributed.

4. Prepare Life Savers:

• Using the hot glue gun, create patterns or mask off areas on the Life Savers that you want to remain undyed. This step allows for intricate designs and customization.

5. Dyeing Process:

• Submerge the prepared Life Savers into the dye mixture. Ensure they are fully covered by the dye solution.
• Let the Life Savers sit in the dye for approximately 20 to 30 minutes. The exact time may vary depending on the intensity of color you desire. For deeper colors, you may need to leave them longer.

6. Rinse and Dry:

• Once the Life Savers have reached your desired color, carefully remove them from the dye mixture.
• Rinse each Life Saver under cold water until the water runs clear. This helps remove excess dye and prevents bleeding.
• Lay the dyed Life Savers on a clean towel to air dry completely. Avoid direct sunlight, as this can affect the color.

7. Final Touches:

• Once dry, remove any remaining hot glue carefully. Your custom dyed Life Savers are now ready to be applied to your Onewheel!

Tips for Success:

• Experiment with Patterns: Use the hot glue gun creatively to mask off areas for unique designs.
• Color Intensity: The longer you leave the Life Savers in the dye, the deeper the color will be.
• Safety First: Handle hot water and dye solutions with care to avoid burns and stains.

Dyeing Onewheel Life Savers is a fun and creative way to personalize your ride. Whether you’re going for a vibrant pop of color or a subtle accent, this DIY project allows you to showcase your unique style. With just a few supplies and a bit of creativity, you can transform your Onewheel into a true reflection of your personality.

Ready to add a splash of color to your ride? Get started with these simple steps and enjoy the satisfaction of riding a customized Onewheel that stands out from the crowd. Happy dyeing!

Disclaimer: